TM 5-5420-202-20-3
MASTER CONTROL PANEL REPAIR (Sheet 35 of 73)
Circuit Breaker Replacement (Sheet 3 of 7)
REMOVAL; CIRCUIT BREAKER (D):
1.
2.
Using socket, remove nut (A),
flatwasher (B), and lockwasher (C)
securing harness junction (D) to
panel.
Lift harness junction (D) off stud and
position aside.
Go on to Sheet 4
10-72
3.
Using fingers, remove two electrical
connectors from rear of circuit breaker
(E) by pulling out.
4.
Using cross-tip screwdriver and wrench,
remove two screws (F), lockwashers (G),
and nuts (H) securing circuit breaker
(E) to panel.
5.
Remove circuit breaker (E).
TA249013