TM-5-5420-202-20-3
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4
OCTOBER 1985
TM-5-5420-202-20-3 - Page 38 of 1060
TM 5-5420-202-20-3
GENERATOR AIR INTAKE TUBE ASSEMBLY REPLACEMENT (Sheet 3 of 3)
INSTALLATION:
1.
Install tube (A) to generator (B) and angle brackets (C) on engine.
2.
Install two flat washers (D), new lockwashers (E), and bolts (F) to brackets (C).
3.
Using socket, tighten bolts (F) to tube (A).
4.
Install clamp (G) to tube (A).
5.
Install clamp (H) to elbow (J).
6.
Install hose (K) to tube (A).
7.
Install assembled elbow (L) to hose (K).
8.
Move clamps (G) and (H) onto hose (K).
9.
Using flat-tip screwdriver, tighten clamps (G) and (H).
10.
Install powerplant (page 5-14).
End of Task
TA248946
10-5
Back to Top
