TM-5-5420-202-20-3
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4
OCTOBER 1985
TM-5-5420-202-20-3 - Page 44 of 1060
TM 5-5420-202-20-3
ENGINE GENERATOR REPLACEMENT (Sheet 6 of 8)
10.
Using screwdriver, tighten three boot
clamps (D).
CAUTION
It is of utmost importance that the
generator support, cradle, and “U”
bolt be installed in a manner that will
not disturb generator mounting aline-
ment and still furnish adequate
support to minimize vibration. Mis-
alinement of 0.010 in. in any direc-
tion is sufficient to cause a leak
(pressure loss) between the generator
mounting flange and the generator
mounting adapter.
Go on to Sheet 7
7.
Using special box wrench, tighten six
nuts (B).
CAUTION
Exercise care to prevent damage
to boot (E).
8.
Position boot (E) onto drive adapter
(C).
9.
Position three boot clamps (D) over
boot (E).
TA248952
10-11
Back to Top
