TM-5-5420-202-20-3
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4
OCTOBER 1985
TM-5-5420-202-20-3 - Page 53 of 1060
TM 5-5420-202-20-3
ENGINE GENERATOR REGULATOR REPLACEMENT (Sheet 1 of 2)
TOOLS:
Spanner wrench
7/16 in. socket with 1/2 in. drive
Flat-tip screwdriver
Ratchet with 1/2 in. drive
SUPPLIES:
Lockwashers (3 required)
PRELIMINARY PROCEDURE:
Remove access cover from floor in
compartment (page 17-9)
commander’s
REMOVAL:
1.
2.
3.
4.
5.
6.
Using spanner
regulator (B).
wrench, remove two electrical connectors
(A) from engine generator
Using screwdriver, remove screw (C) securing ground (D) to engine generator regulator
(B).
Remove ground (D) and lockwasher (E) from engine generator regulator (B).
Using socket, remove screw (F) and two lockwashers (G) securing ground (D) to hull.
Using screwdriver, loosen four screws (H) securing engine generator regulator
(B) to mounting bracket (J).
Remove engine generator regulator (B) from vehicle.
Go on to Sheet 2
10-18
TA248959
Back to Top
