TM-5-5420-202-20-3
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4
OCTOBER 1985
TM-5-5420-202-20-3 - Page 57 of 1060
TM 5-5420-202-20-3
Change 7
10-20.2
HEU ENGINE GENERATOR REGULATOR REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
1.
Place engine generator regulator (A) in position on mounting bracket (B).
2.
Using socket, install four screws (C) washers (D) and new lockwashers (E) securing engine
generator regulator (A) to mounting bracket (B).
3.
Place ground (F) washer (G) and new lockwasher (H) in position on engine generator
regulator (A).
4.
Using screwdriver, install screw (J) securing ground (F) to engine generator regulator (A).
5.
Connect electrical connector (K) to engine generator regulator (A).
6.
Replace access plate (page 17-9).
7.
Connect three battery grounds (page 10-268).
8.
Check generator for operation (TM 5-5420- 202 -10).
Back to Top
