TM-5-5420-202-20-3
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4
OCTOBER 1985
TM-5-5420-202-20-3 - Page 55 of 1060
TM 5-5420-202-20-3
ENGINE GENERATOR REGULATOR MOUNTING BRACKET REPLACEMENT (Sheet 1 of 1)
TOOLS:
7/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
SUPPLIES:
Lockwashers (4 required)
PRELIMINARY PROCEDURE:
Remove engine generator regulator (page 10-18)
REMOVAL:
1.
Using socket, remove four screws (A)
and lockwashers (B) securing mounting
bracket (C) to hull floor.
2.
Remove mounting bracket (C).
INSTALLATION:
1.
Place mounting bracket (C) in position
on hull floor.
2.
3.
Using socket, install four screws (A)
and lockwashers (B) securing mounting
bracket (C) to hull floor.
Install engine generator regulator
(page 10-19).
End of Task
10-20
TA248961
Back to Top
