TM-5-5420-202-20-3
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4
OCTOBER 1985
TM-5-5420-202-20-3 - Page 54 of 1060
TM 5-5420-202-20-3
ENGINE GENERATOR REGULATOR REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
1. Place engine generator regulator (A)
in position on mounting bracket (B).
2. Using screwdriver, tighten four screws
(C) securing engine generator regulator
(A) to mounting bracket (B).
3.
4.
5.
6.
7.
8.
9.
Using spanner wrench, connect two electrical connectors (D) to engine generator
regulator (A).
Place ground (E) and lockwashers (F) inpositionon engine generator regulator (A).
Using screwdriver, tighten screw (G) securing ground (E) and lockwashers (F) to
engine generator regulator (A).
Place other end of ground (E), screw (H), and two lockwashers (J) in position on hull.
Using socket, tighten screw (H) securing ground (E) to hull.
Replace access plate (page 17-9).
Check generator for operation (TM 5-5420-202-10).
End of Task
TA248960
10-19
Back to Top
