TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 461 of 1060

TM 5-5420-202-20-3

DUST DETECTOR WARNING LIGHT HARNESS ASSEMBLY REPLACEMENT (Sheet 1 of 2)

TOOLS:

7/16 in. combination box and open end wrench (2 required)

Pliers, slip joint, plastic jaw insert

SUPPLIES:

Lockwasher (2 required)

PRELIMINARY PROCEDURE: Disconnect three battery ground straps (page 10-268)

REMOVAL:

1.

2.

3.

4.

5.

Disconnect four lead connectors (A) connecting dust detector warning light wiring harness

(B) to front master harness assembly (C) and powerplant warning light harness (D).

Using one 7/16 inch wrench to hold nut (E), use other 7/16 inch wrench to remove screw

(F), lockwashers (G), and nut (E) securing ground leads (H) along side of gage indicator

panel.

Disconnect dust detector warning light harness short lead (J) from hull intermediate lead

assembly (K).

Using pliers, disconnect harness connector (L)

from dust detector warning light box (M).

Go on to Sheet 2

Change 1

10-298.12