TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 463 of 1060

TM 5-5420-202-20-3

DUST DETECTOR WARNING LIGHT BOX ASSEMBLY AND MOUNTING BRACKET

REPLACEMENT (Sheet 1 of 2)

TOOLS:

Pliers, slip joint, plastic jaw insert

7/16 in. combination box and open end wrench (2 required)

SUPPLIES:

Lockwasher (4 required)

REMOVAL:

1.

Using pliers, disconnect harness connector (A)

from dust detector warning light box assembly (B).

2.

Using wrenches, remove two screws

(C), lockwashers (D), and nuts (E)

securing dust detector warning light

3.

4.

box assembly (B) to mounting bracket (F).

Remove dust detector warning light box

assembly (B).

If necessary, use wrench to remove two

screws (G) and lockwashers (H) securing

mounting bracket (F) to vehicle.

Go on to Sheet 2

10-298.14

Change 1