TM-5-5420-202-20-3
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4
OCTOBER 1985
TM-5-5420-202-20-3 - Page 514 of 1060
TM 5-5420-202-20-3
FORWARD INBOARD BELL CRANK ASSEMBLY REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Install washer (A) and bell crank (B) on stud (C) with long arm of bell crank (B) to left.
Using 9/16 inch wrench, install washer (D), washer (E), and nut (F).
Using pliers, install cotter pin (G).
Aline rod end (H) in long arm of bell
crank (B).
Using 9/16 inch wrench, install bolt
(J) in bell crank (B) through rod
end (H).
Aline rod end (K) in short arm of bell
crank (B).
Using 9/16 inch wrench, install bolt
(J) in bell crank (B) through rod end (K).
Adjust shifting controls and linkages
(page 11-52).
Install operators floor access plate
(page 17-10).
Remove blocks from tracks.
End of Task
TA249283
11-17
Back to Top
