TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 511 of 1060

TM 5-5420-202-20-3

SHIFTING CONTROL AND RELATED PARTS REPAIR AND REPLACEMENT (Sheet 13 of 14)

6.

Using socket, extension, and ratchet,

tighten screws installed in steps 3, 4,

and 5, alternately.

NOTE

Make sure that components

are properly alined. If com-

ponents bind, use shims as

required

to make sure of

proper alinement and freedom

of movement.

7.

Position brake control clevis (Q) over

brake lever (R).

8.

Install straight pin (S) through clevis

(Q) and lever (R).

9.

Using pliers, install cotter pin (T) in

straight pin (S).

Go on to Sheet 14

10.

Place rod end (U) in link clevis (V).

11.

Using 9/16 inch wrench, install bolt

(W) securing rod end (U) to link (V).

12.

Using cross-tip screwdriver,

six screws (X) securing floor

install

plate (Y).

TA249281

11-14