TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 516 of 1060

FORWARD OUTBOARD LEVER ASSEMBLY REPLACEMENT (Sheet 2 of 3)

WARNING

Use effective chip guarding and personal protective

equipment (goggles/shield, gloves,

and welding operations. Failure to

personal injury.

TM 5-5420-202-20-3

etc.) during cutting

do so could result in

Remove flammable materials, such as spilled fuel or

oil, from immediate area.

Place wet rags or

nonflamable cloth around area being welded. Follow

safety procedures as listed in TM 9-237 "Operator’s

Manual, Welding Theory and Practice."

5. Using torch, remove lever assembly (F) from

supports (G) which are welded to hull.

WARNING

Use effective chip guarding and personal protective

equipment (goggles/shield, gloves, etc.) during grinding

operations.

Failure to do so could result in personal injury.

NOTE

Use grinder to clean old

welds so that new assembly

can be welded in place.

INSTALLATION:

1.

Using C-clamp (A), clamp new lever assembly

(B) in place.

2.

Using torch, weld new lever assembly

(B) in place.

Go on to Sheet 3

TA249285

11-19