TA249362
TM 5-5420-202-20-3
TRANSMISSION SIDE OIL STRAINER ASSEMBLY SERVICE (Sheet 1 of 8)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
11-97
Disassembly
11-99
Cleaning and Inspection
11-99
Assembly
11-100
Installation
11-101
TOOLS: Slip joint pliers
1/2 in. socket with 1/2 in. drive
10 in. extension with 1/2 in. drive
Ratchet with 1/2 in. drive
12 in. adjustable wrench
3/4 in. socket with 1/2 in. drive
Torque wrench with 3/8 in. drive (0-200 lb-in)
Tube bender
9/16 in. socket with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
SUPPLIES:
5/16-18 in. jackscrews (2 required)
Gaskets (3 required)
Preformed packing
Washer seals (6 required)
Hose clamp pliers
Diagonal cutting pliers
7/16 in. socket with 3/8 in. drive
Putty knife
1/2 in. combination box and open
end wrench
Dry cleaning solvent (Item 55, Appendix D)
PRELIMINARY PROCEDURES:
REFEREN
Rags (Item 65, Appendix D)
Lockwire (Item 61, Appendix D)
Gloves (Item 69, Appendix D)
Goggles (Item 70, Appendix D)
Lockwashers (8 required)
Drain transmission oil (page 6-8).
Remove powerplant (page 5-2)
Remove left brake control housing (page 13-64)
CE: LO 5-5420-202-12
Go on to Sheet 2
11-96