TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 587 of 1060

TM 5-5420-202-20-3

TRANSMISSION OIL BREATHER TUBE REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

7.

8.

9.

10.

1.

2.

3.

4.

5.

Using fingers start elbow (A) into transmission (B).

Using 3/4 inch wrench, install and aline

elbow (A) as shown.

Using fingers install elbow (C) into nut (D).

Using 7/8 inch wrench on nut (D) and 3/4 inch

wrench on elbow (C), tighten nut (D).

Position tube (E) between elbow (A) and nut

(D). If necessary, use 3/4 inch wrench to

aline elbow (A) with nut (F).

Using fingers start nut (F) on elbow (A) and

Using fingers start nut (G) onto elbow (C).

Using 7/8 inch wrench, tighten coupling

nut (G).

tighten with 7/8 inch wrench.

Start engine.

Check for exhaust leaks at

transmission oil breather tube (E) connections.

Install transmission shroud (page 9-6).

End of Task

TA249354

11-88