TM 5-5420-202-20-3
NEUTRAL SHIFT SWITCH ADJUSTMENT (Sheet 2 of 3)
2.
Disconnect electrical
connectors (A) and (B).
3.
Set up multimeter for
continuity test .
4.
Using two wrenches, loosen
jamnut (C) while holding
screw (D).
5.
6.
Connect multimeter leads (E) and (F)
to connectors (A) and (B).
Using wrench, shorten screw (D) by
turning clockwise.
Go on to Sheet 3
TA249347
11-81