TM 5-5420-202-20-3
SHIFT LINKAGE ADJUSTMENT (Sheet 21 of 28)
110.
111.
112.
113.
114.
Go on to Sheet 22
11-72
Using 9/16 inch wrench, turn rod bearing
end (EM) clockwise until rod (BP) is past
hole (BQ).
Using vise, torque wrench, and 9/16 inch
crow foot adapter, tighten jamnut (BL) to
16-18 lb-ft (22-24 N·m).
Using vise and 9/16 inch wrench, loosen jamnut (BS).
Using vise and 9/16 inch wrench, turn rod bearing end (BN)
until distance between centers of rod end bearings (BM) and
clockwise or counterclockwise
(BN) measures 5-3/4 inches.
Using vise, torque wrench, and 9/16 inch crow foot adapter, tighten jamnut (BS) to 16-18
lb-ft (22-24 N·m) while maintaining 5-3/4 inch measurement. Go to step 120.
TA249338