TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 560 of 1060

TM 5-5420-202-20-3

SHIFT LINKAGE ADJUSTMENT (Sheet 12 of 28)

58.

59.

60.

61.

62.

63.

64.

65.

66.

Using 9/16 inch wrench, remove screw (AM).

Using 9/16 inch wrench, adjust shifting

rod bearing end (AL) by turning clockwise

until shifting rod (AH) is past hole (AK).

Using 9/16 inch wrench, install screw (AM).

Holding rod bearing end (AL) with 9/16 inch

wrench, use torque wrench and 9/16 inch crow-

foot adapter to tighten jamnut (AE) to 16-18

lb-ft (22-24 N·m).

Using torque wrench and 9/16 inch socket,

tighten screw (AM) to 16-18 lb-ft (22-24 N·m).

Using 9/16 inch wrench, adjust shifting rod

bearing end (AG) by turning clockwise or

counterclockwise until screw (AF) will drop

freely through clevis (AC) and shifting rod

bearing end (AG).

Using 9/16 inch wrench, install screw (AF).

Holding rod, bearing end (AG) with 9/16 inch wrench, use torque wrench and 9/16 inch

crowfoot adapter to tighten jamnut (AD) to 16-18 lb-ft (22-24 N·m).

Using torque wrench and 9/16 inch socket, tighten screw (AF).

Go on to Sheet 13

TA249329

11-63