TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 552 of 1060

TM 5-5420-202-20-3

SHIFT LINKAGE ADJUSTMENT (Sheet 4 of 28)

6.

Go to right rear of vehicle and try to insert

locating pin into alinement hole (C). If

locating pin cannot be inserted, go to step 7.

If locating pin can be inserted, go to step 127.

7.

8.

9.

At driver’s station, using 9/16 inch wrench,

remove six bolts (J) securing access plate and

gasket (K) to floor in front of driver’s seat.

Remove access plate and gasket (K).

At forward inboard link assembly, try to

insert locating pin (L) into alinement holes

in bracket (M) and link (N). If locating

pin (L) can be inserted, remove locating

pin (L) and go to step 39. If locating pin (L)

cannot be inserted, go on to step 10.

TA249321

11-55

Go on to Sheet 5