TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 543 of 1060

TM 5-5420-202-20-3

SHIFTING CONTROL BRACKET AND LINK ASSEMBLY REPAIR (Sheet 6 of 11)

NOTE

If bearings (T) are to be

replaced, perform steps 14

and 15.

14.

15.

Place lever (R) in vise and using 1/8 inch

punch and hammer, remove bearings (T).

Using vise, press two new bearings (T),

one at a time, into lever (R). Bearings

(T) must be flush with outer surface of

lever (R).

INSPECTION:

Inspect bearings, washers,

and grease fitting for

wear or damage. Replace

as necessary.

Go on to Sheet 7

11-46

TA249312