TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 545 of 1060

TM 5-5420-202-20-3

SHIFT CONTROL BRACKET AND LINK ASSEMBLY REPAIR (Sheet 8 of 11)

10.

Using fingers install nuts (K) and rod

ends (L) on stud (M).

NOTE

When adjusting clevises or rod

ends,

make

certain

that

threads on control rods extend

past the witness hole in the rod

end to ensure a positive grip.

1 .

Using two 9/16 inch wrenches and 6

inch rule, adjust rod ends (L) to obtain

the same center-to-center distance

between rod end holes as measured

2 .

and recorded in steps 3 and 4, DISASSEMBLY.

Using torque wrench and crow foot adapter,

tighten nuts (K) against rod ends (L)

to 16-18 lb-ft (22-24 N·m).

Go on to Sheet 9

TA249314

11-48