TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 549 of 1060

TM 5-5420-202-20-3

SHIFT LINKAGE ADJUSTMENT (Sheet 1 of 28)

TOOLS:

7/16-in. socket with 1/2-in. drive

Ratchet with 1/2-in. drive

9/16-in. combination box and open end wrench (2 required)

Torque wrench with 1/2-in. drive (0 to 175 lb-ft) (0 to 237 N·m)

7/16 in. combination box and open end wrench

Bench vise

9/16-in. socket with 1/2-in. drive

9/16 in. crowfoot adapter with 3/8 in. drive

SUPPLIES:

Locating pins (1/8-in. diameter by 2-1/2 in. long copper rod). Wire (0.06 in.

diameter by 2-in. long) (Item 61, Appendix D)

REFERENCE:

TM 5-5420-202-10

PRELIMINARY PROCEDURES:

Block tracks and place transmission shift lever in neutral

(TM 5-5420-202-10)

Remove top deck (page 16-21)

Remove transmission shroud (page 9-2)

Go on to Sheet 2

11-52

Change 4