TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 544 of 1060

TM 5-5420-202-20-3

SHIFTING CONTROL BRACKET AND LINK ASSEMBLY REPAIR (Sheet 7 of 11)

ASSEMBLY:

1.

2.

3.

4.

5.

6.

7.

8.

9.

Position two washers (A) on lever (B).

Carefully position washers (A) and lever

(B) in bracket (C) with all holes alined.

Position pin (D) under bracket (C) with

pin hole alined with pin hole in bracket

(C).

Using hammer and 1/2 inch punch, install

pin (D) through bracket (C), washers

(A), and lever (B).

Using hammer, install pin (E) through

pin hole in bracket (C) and shaft (D).

Using 1/4 inch wrench, install grease

fitting (F).

Using vise, install bearing (G) in bracket (C).

Position link assembly (H) on bracket (C).

Using 3/4 inch wrench, install nut (J)

on link assembly (H).

Go on to Sheet 8

TA249313

11-47