TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 536 of 1060

TM 5-5420-202-20-3

SHIFTING CONTROL BRACKET ASSEMBLY AND CONNECTING LINK

REPLACEMENT (Sheet 2 of 2)

3.

Using 3/4 inch wrench to hold stud (D), use 3/4 inch

lockwasher (F).

4.

Remove bracket assembly (G) from transmission.

wrench to remove screw (E) and

5.

Using punch and hammer, remove spring pin (H). Throw pin away.

6.

Remove lever (J).

7.

Remove shaft (K).

INSTALLATION:

1.

2.

3.

4.

5.

6.

7.

8.

Install shaft (K) in bracket assembly (G).

Position lever (J) on shaft (K).

Using hammer, install new spring pin (H) through lever (J) and shaft (K).

Position bracket assembly (G) on transmission.

Using 3/4 inch socket with extension, install two nuts (B) and lockwashers (C).

Using 3/4 inch wrench, install screw (E) and lockwasher (F).

Using 7/16 inch wrench, install screw (A) through both parts of connecting link (K).

Install shifting control lever (page 11-37).

End of Task

TA249305

11-39