TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 561 of 1060

TM 5-5420-202-20-3

SHIFT LINKAGE ADJUSTMENT (Sheet 13 of 28)

DRIVER’S STATION

67.

At driver’s station, use 9/16 inch wrench

to install six bolts (J) and secure access

plate and gasket (K) to floor in front of

driver’s seat.

68.

Go to right rear of vehicle and try to insert

locating pin into alinement hole (C) and through

link (AN). If locating pin can be inserted,

shift linkage is in adjustment. Remove

locating pin and go to step 126. If locating

pin can not be inserted, go to step 69.

69.

Remove powerplant (page 5-2).

Go on to Sheet 14

TA249330

11-64