TM-5-5420-202-20-3
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4
OCTOBER 1985
TM-5-5420-202-20-3 - Page 564 of 1060
TM 5-5420-202-20-3
SHIFT LINKAGE ADJUSTMENT (Sheet 16 of 28)
81.
Using 9/16 inch wrench, remove screw (AZ).
82.
Using 9/16 inch wrench, adjust shifting rod
bearing end (BC) by turning clockwise until
shifting rod (BB) is past hole (BD).
83.
Using 9/16 inch wrench, remove screw (BG).
84.
FORWARD OUTBOARD
LINK ASEMBLY
Using 9/16 inch wrench, install screw (AZ)
through clevis (BA) and shifting rod bearing
end (BC).
85.
Holding rod bearing end (BC) with 9/16 inch wrench, use torque wrench and 9/16 inch
crowfoot adapter to tighten jamnut (AX) to 16-18 lb-ft (22-24 N·m).
86.
Using torque wrench and 9/16 inch socket, tighten screw (AZ) to 16-18 lb-ft (22-24 N·m).
Go
on
to Sheet 17
TA249333
11-67
Back to Top
