TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 589 of 1060

TM 5-5420-202-20-3

TRANSMISSION MAIN OIL FILTER ELEMENT REPLACEMENT (Sheet 2 of 7)

3.

4.

5.

6.

Using two 1/4 inch x 20 NF x 3 inch long bolts

(D.1) and 7/16 inch socket, loosen filter

assembly by installing bolts in holes (E) and

tightening evenly to withdraw filter assembly(C).

Using 7/16 inch socket, remove two 1/4 inch x

20 NF x 3 inch long bolts (D.1) from filters.

NOTE

Lift filter assembly (C) slowly and straight up

to reduce the possibility of oil entering bolt

holes (E.1).

Slowly lift filter assembly

transmission. Remove and

NOTE

(C) straight out of

discard gasket (F).

Some filters are secured with self locking

nuts and do not require lockwiring.

Using diagonal cutting pliers, remove lockwire

(G), if present, securing nuts on bottom of filter

assembly (C).

Go on to Sheet 3

11-90

Change 4