TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 588 of 1060

TM 5-5420-202-20-3

TRANSMISSION MAIN OIL FILTER ELEMENT REPLACEMENT (Sheet 1 of 7)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

11-89

Cleaning and Inspection

11-92

Installation

11-93

TOOLS: 9/16 in. socket with 1/2 in. drive

Diagonal cutting pliers

7/16 in. socket with 1/2 in. drive

Putty knife

5 in. extension with 1/2 in. drive

Slip joint pliers

1 in. combination box and open end wrench

Snapring pliers

Torque wrench with 1/2 in. drive

Ratchet with 1/2 in. drive

SUPPLIES:

Filter cover gasket

Gloves (Item 69, Appendix D)

Clean rags (Item 65, Appendix D)

Goggles (Item 70, Appendix D)

Dry cleaning solvent (Item 55, Appendix D)

Locking wire (Item 61, Appendix D)

Two 1/4 in. x 20 NF x 3 in. long bolts

PRELIMINARY PROCEDURES:

Remove top deck (page 16-21)

Remove transmission shroud (page 9-2)

REMOVAL:

NOTE

Some filter assemblies are secured with nuts and threaded

studs instead of bolts and lockwashers.

1. Using 9/16 inch socket with 5 inch extension, remove 10

(B) holding filter assembly (C) to front of transmission.

bolts (A) and lockwashers

2.

Remove clamp bracket (D).

Go on to Sheet 2

TA249355

11-89