TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 938 of 1060

TM 5-5420-202-20-3

STEERING CONTROL LINKAGE ADJUSTMENT (Sheet 1 of 22)

TOOLS: 7/16 in. combination box and open end wrench

9/16 in. combination box and open end wrench (2 required)

3/4 in. combination box and open end wrench

Torque wrench with 1/2 in. drive (0-175 lb-ft)

9/16 in. socket with 1/2 in. drive

Needle nose pliers

9/16 in. crowfoot with 1/2 in. drive

SUPPLIES:

Metal locating pins (4 required-1/8 in. by 2-1/2 in. long)

Metal pin (1/16 in. by 2 in. long)

Cotter pin

Small gage wire

REFERENCE:

TM 5-5420-202-10

PRELIMIN ARY PROCEDURES:

Adjust track tension (TM 5-5420-202-10)

Block tracks (TM 5-5420-202-10)

Remove transmission shroud (page 9-2)

Go on to Sheet 2

TA249654

15-31