TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 943 of 1060

TM 5-5420-202-20-3

STEERING CONTROL

20.

21.

22.

23.

24.

25.

26.

27.

rod end (K), use 9/16 inch wrench to

loosen jarnnut (N).

Using hands, turn control rod (J) clock-

wise until control rod (J) is just past

witness hole in steering rod end (K).

Using 9/16 inch wrench, to hold steering

rod end (K), use 9/16 inch wrench to

tighten jamnut (N).

Using 9/16 inch wrench, turn steering rod

end (F) counterclockwise until screw (E)

will drop freely through clevis (G) and

steering rod end (F).

Using 9/16 inch wrench, install screw (E)

through clevis (G) and steering rod end

(F).

LINKAGE ADJUSTMENT (Sh

Using 9/16 inch wrench to hold steering

Using socket and torque wrench, tighten

screw (E) to 16 lb-ft (22 N.m).

Using 9/16 inch wrench to hold steering rod end (F), use 9/16 inch wrench to tighten

jamnut (H).

Remove locating pin (A).

Go on to Sheet 7

15-36

TA249659