TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

  TM-5-5420-202-20-3 - Page 939 of 1060

TM 5-5420-202-20-3
STEERING CONTROL LINKAGE ADJUSTMENT (Sheet 2 of 22)
ADJUSTMENT:
NOTE
When the engine, transmission, or entire powerplant is
exchanged in a vehicle, driver’s steering control must be
checked for centering and adjustment. If the vehicle cen-
tering and linkage adjustment was satisfactory before the new
powerplant was installed, go to step 119.
NOTE
Check to make sure rod end bearings are serviceable before
proceeding with any linkage adjustments.
NOTE
It may be necessary to manually move link assembly be-
fore locating pin (P) can be inserted.
2.
Check to see if driver’s steering control
(B) centers.
If steering control (B) is
centered, go on to step 3.
If steering
control (B) is not centered, go on to step
Go on to Sheet 3
15-32
TA249655


Back to Top