TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

  TM-5-5420-202-20-3 - Page 942 of 1060

TM 5-5420-202-20-3
STEERING CONTROL LINKAGE ADJUSTMENT (Sheet 5 of 22)
12.
13.
14.
15.
16.
17.
18.
Using 9/16 inch wrench, remove screw
(L).
Remove steering rod end (K) from link
assembly (M).
Position steering rod end (F) in clevis (G)
and using 9/16 inch wrench, install screw
(E).
Using 9/16 inch socket and torque wrench,
tighten screw (E) to 16 lb-ft (22 N.m).
Using 9/16 inch wrench to hold steering
rod end (K), use 9/16 inch wrench to
loosen jamnut (N).
Using 9/16 inch wrench, turn steering rod
end (K) counterclockwise until screw (L)
will pass freely through link assembly (M)
and steering rod end (K).
Using 9/16 inch wrench, install screw (L) through link assembly (M) and steering rod
end (K). Using torque wrench, tighten screw (L) to 16 lb-ft (22 N.m).
19.
Using 9/16 inch wrench to hold steering rod end (K), use 9/16 inch wrench to tighten
jamnut (N) and go on to step 27.
Go on to Sheet 6
TA249658
15-35


Back to Top