TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 952 of 1060

TM 5-5420-202-20-3

STEERING CONTROL LINKAGE ADJUSTMENT (Sheet 15 of 22)

76.

77.

78.

79.

80.

81.

82.

83.

Try to insert locating pin (AK). If locating

pin (AK) can be inserted, go on to step

109. If locating pin (AK) cannot be inserted,

go to step 77.

Using 7/16 inch wrench, remove screw

(AL).

Using pliers,

remove cotter pin (AM).

Using 3/4 inch wrench, remove nut (AN)

and remove plate (AP).

Using 9/16 inch wrench, loosen jamnut (AQ).

Using 9/16 inch wrench, remove screw (AR).

Move link assembly and insert locating pin (AK).

Using 9/16 inch wrench, ad-just length of control rod (AS) by turning steering rod end

(AT) clockwise or counterclockwise until screw (AR) can be freely inserted through clevis

(AU) and steering rod end (AT).

Go on to Sheet 16

TA249668

15-45