TM-5-5420-202-20-3
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4
OCTOBER 1985
TM-5-5420-202-20-3 - Page 955 of 1060
TM 5-5420-202-20-3
STEERING CONTROL LINKAGE ADJUSTMENT (Sheet 18 of 22)
97.
98.
99.
100.
101,
102.
103.
Using 9/16 inch wrench, install screw
(AV).
Using
torque
wrench and
crow foot,
tighten screw (AV) to 16 lb-ft (22 N.m)
and go on to step 109.
Using 9/16 inch wrench, turn steering rod
end (AW) clockwise until control rod (AZ)
is just past witness hole in steering rod
end (AW).
Using 9/16 inch wrench to hold steering
rod end (AW), use 9/16 inch wrench to
tighten jamnut (AX).
Using 9/16 inch
(BA).
Position steering
wrench,
remove screw
rod end (AW) in clevis
(AY) and using 9/16 inch wrench, install
screw (AV).
Using
torque
wrench and
crow foot,
tighten screw (AV) to 16 lb-ft (22 N.m).
LEFT OF DRIVER’S STATION
Go on to Sheet 19
15-48
TA249671
Back to Top
