TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 962 of 1060

TM 5-5420-202-20-3

TOWING PINTLE REPAIR (Sheet 2 of 5)

DISASSEMBLY:

1.

Using pliers and hammer, remove cotter

pin (A) from nut (B) at rear of towing pintle

(C).

2.

Place crowbar through hole of towing

pintle (C).

5.

6.

7.

8.

9.

Using pliers, remove cotter pin (F).

Using 5/16 inch socket, remove fitting

(G).

Place 1-1/2 inch wrench on bolt (H).

Using 1-1/2 inch socket, remove nut

(J) and bolt (H) securing latch (K) to

towing pintle (C).

Remove latch (K).

Go on to sheet 3

3.

With one technician holding crowbar, and

another technician using 3-1 /4 inch socket,

remove nut (B) and flat washer (D).

4.

Pull cotter pin (E) that is hooked to

chain out of towing pintle (C).

16-3