TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 961 of 1060

TM 5-5420-202-20-3

TOWING PINTLE REPAIR (Sheet 1 of 5)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

16-2

Disassembly

16-3

Cleaning and Inspection

16-4

Assembly

16-4

Installation

16-6

Grease gun, hand

TOOLS: 1-5/16 in. open end wrench

Ratchet with 3/8 in. drive

Hammer

3-1/4 in. socket with 1 in. drive

Flat-tip screwdriver

Ratchet with 1 in. drive

Center punch

1-1/2 in. socket with 3/4 in. drive

3/8 in. drive punch

1-5/16 in. socket with 3/4 in. drive

60 in. pinchpoint crowbar

8 in. extension with 3/4 in. drive

5/16 in. socket with 3/8 in. drive

Ratchet with 3/4 in. drive

Slip joint pliers

1-1/2 in. open end wrench

SUPPLIES:

Dry cleaning solvent (Item 55, Appendix D)

Gloves (Item 69, Appendix D)

PERSONNEL

REMOVAL:

Cotter pins

Low-pressure air supply (30 psi maximum)

Lockwashers (4 required)

1.

2.

3.

Go

Place 1-5/16 inch wrench on each of

the four nuts (A).

Holding nut (A) with 1-5/16 inch wrench

and using 1–5/16 inch socket, remove four

bolts (B), lockwashers (C), and nuts (A).

Remove towing pintle (D) from vehicle.

on to Sheet 2

Goggles (Item 70, Appendix D)

REAR OF VEHICLE

16-2