TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 958 of 1060

TM 5-5420-202-20-3

STEERING CONTROL LINKAGE ADJUSTMENT (Sheet 21 of 22)

119.

Try to insert locating pin (A). If locating

pin (A) can be inserted, go on to step 128.

If locating pin (A)

to step 120.

120.

Using 9/16 inch

(BJ).

cannot be inserted, go

wrench,

remove screw

121.

Insert locating pin (A).

122.

LEFT SIDE OF TRANSMISSION

123.

124.

126.

Using 9/16 inch wrench to hold steering

rod end (BK), use 9/16 inch wrench to

loosen jamnut (BL).

Using 9/16 inch wrench, turn steering rod

end (BK) clockwise or counterclockwise

until screw (BJ) can be inserted freely

through clevis (BM) and steering rod end

(BK).

Using 9/16 inch wrench to hold steering rod end (BK), use 9/16 inch wrench to tighten

jamnut (BL).

Position steering rod end (BK) in clevis (BM) and using 9/16 inch wrench install screw

(BJ).

Remove locating pin (A).

Using socket and torque wrench, tighten screw (BJ) to 16 lb-ft (22 N.m).

Go on to Sheet 22

TA249674

15-51