TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 964 of 1060

TM 5-5420-202-20-3

TOWING PINTLE REPAIR (Sheet 4 of 5)

3.

Place spring (D) in installation position

in latch (E).

4.

5.

6.

7.

8.

15.

16.

17.

Place latch (F) in installation position

in latch (E).

Using hammer, install pin (G) securing

latch (F) to latch (E).

Using hammer and center punch, stake

pin (G) in four places to latch (E).

Using 5/16 inch socket, install fitting

(H) in pin (G).

Slide sleeve (J) onto pintle (B).

Place flat washer (P) and nut (Q) on

towing pintle (B).

Place crowbar through hole in towing

pintle (B).

Using 3-1/4 inch socket, tighten nut (Q),

while other technician holds crowbar.

G

O

on to Sheet 5

9.

Place latch (E) in installation position

on pintle (B).

10.

11.

12.

Install bolt (K) through latch (E) and

pintle (B). Install nut (L) on bolt (K).

Using 1-1/2 inch socket and 1-1/2 inch

wrench, tighten bolt (K) and nut (L).

Aline hole in bolt (K) with slot in nut

(L).

13.

Using pliers, install cotter pin (M) through

nut (L) and bolt (K).

14.

Using 5/16 inch socket, install fitting

(N) in bolt (K).

16-5