TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 998 of 1060

TM 5-5420-202-20-3

COVER ASSEMBLY (IESCAPE HATCH) REPAIR (LATE MODEL) (Sheet 3 of 5)

11. Remove handle (N) assembly and two lingages

(P) from cover (B).

12. Using 5/8 inch wrench, remove two screws (Q)

separating handle assembly from two linkages.

CLEANING AND INSPECTION:

1.

Using rags, clean surface bolts and linkages

of any excess dirt buildup.

2.

Clean seal groove and seal with dry cleaning solvent and coat with silicone compound.

3.

Inspect all components for damage or wear. Replace as required.

ASSEMBLY:

1.

Place two linkages (A) in position on handle

assembly (B).

2.

Using 5/8 inch wrench, install two screws (C)

securing linkages (A) to handle assembly (B).

3.

Place linkages and handle assembly (A and B)

in position on access cover (D).

Go on to sheet 4

TA249712

16-39