TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 997 of 1060

TM 5-5420-202-20-3

COVER ASSEMBLY (ESCAPE HATCH) REPAIR (LATE MODEL) (Sheet 2 of 5)

2.

3.

4.

8.

9.

10.

Using adjustable wrench to hold linkage (C), use

3/4 inch wrench and loosen two jam nuts (D).

Using 5/8 inch wrench, remove screw (E)

securing linkage (C) to cover (B).

Remove linkage (C) from cover (B).

Using hammer and punch, make a notch on

grooved pin (K) and on cover (B) for alinement

purposes during installation.

Using hammer and punch, drive spring pin (L)

from handle assembly (M). Do not remove.

Remove grooved pin (K) from handle assembly

(M) by pushing up from bottom.

Go on to Sheet 3

16-38

5.

6.

7.

Using socket head screw key, remove

screw (F) securing surface bolt (G)

to linkage.

Remove surface bolt (G).

Using 3/4 inch wrench, remove two end

connectors (J) and jamnuts (D) from stud (H).

TA249711