TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 993 of 1060

TM 5-5420-202-20-3

TRANSMISSION DRAIN ACCESS COVER REPLACEMENT (Sheet 1 of 1)

TOOLS: 9/16 in. socket with 1/2 in. drive

Putty knife

Ratchet with

Pry bar

Hammer, ball

SUPPLIES:

Adhesive

Gasket

1/2 in. drive

peen, 2-pound

(Item 2, Appendix D)

Lockwasher (6 required)

PERSONNEL:

Two

1.

Two persons crawl under rear of vehicle

and locate transmission access cover (A).

2.

With one person holding access cover (A),

second person, using socket, remove six

screws (B) and lockwashers (C).

3.

Remove access cover (A) and gasket (D)

with pry bar and hammer. Throw gasket

away.

4.

Using putty knife, scrape off all gasket and

INSTALLATION:

adhesive residue.

1.

Apply adhesive to new gasket (D) and position onto access cover (A).

2.

With one person holding access cover (A) and gasket (D) in position, second person, using

socket, install six screws (B) and lockwashers (C) securing access cover (A) to vehicle.

End of Task

TA249707

16-34