TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 308 of 534

TM 5-5420-202-20-4

SMOKE GRENADE DISCHARGER REPLACEMENT (Sheet 2 of 2)

REPAIR: Refer to TM 3-1040-266-20&P for procedure to repair Smoke Grenade discharger.

INSTALLATION:

Make sure there are no

grenades in dischargers.

dental firing of grenade

hurt or kill you.

-

NOTE

Installation procedure

same for both the right

dischargers

1.

Apply two to three drops of locking

compound (Item 15, Appendix D) to

threads of three screws (A).

2.

Put discharger (B) in position on

bracket (C). Using socket, extension,

and torque wrench, secure discharger (B)

to bracket (C) with three screws (A)

and washers (D). Tighten screws (A)

to

55-74

lb-ft (75-100 N•m).

3.

Connect electrical connector (E)

of discharger harness to receptacle

on back of discharger

(B).

4.

Perform smoke grenade launcher

End

function check (page 22-30).

of Task

smoke

Acci-

could

is

the

and left

TA249165

22-24