TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 309 of 534

SMOKE GRENADE DISCHARGER

TM 5-5420-202-20-4

WIRING HARNESS ASSEMBLY REPLACEMENT (Sheet 1 of 2)

TOOLS: 7/16 in. socket with 3/8 in. drive

Ratchet with 3/8 in. drive

Slip joint pliers, conduit style, with plastic jaw inserts

SUPPLIES:

Lockwashers (2

required)

REMOVAL:

1.

2.

3.

4.

Go

WARNING

Make sure

there are no smoke

grenades in dischargers. Acci-

dental firing of grenade could

hurt or

kill you.

NOTE

Replacement of the discharger

wiring harness is the same for

both the right and left sides. Re-

placement of the left side har-

ness is shown.

on to Sheet 2

Set MASTER BATTERY switch (A)

to OFF.

Using pliers, disconnect electrical

connector (B) from discharger unit

receptacle (C) and disconnect electrical

connector (D) from headlight adapter

receptacle (E).

Using socket and ratchet, remove screw (F)

and lockwasher (G) securing clamp

(H) and harness (J) to headlamp boom

pivot mount (K).

Take clamp (H) off harness (J). Take

harness (J) off vehicle.

TA2491 66

22-25