TM 5-5420-202-204
SMOKE
GRENADE LAUNCHER FUNCTIONAL
CHECK (Sheet 2 of 3)
3.
Set
multimeter to 0-50 VDC scale.
NOTE
During following checks, hold
multimeter negative test probe
to ground (vehicle or discharger)
and touch positive test probe to
tip of plug (F) at bottom center
of each discharger (G, H) barrel.
CAUTION
Do not short circuit multimeter
probe from barrel contact to
ground. Arcing will result,
4.
Press and hold FIRE SMOKE LEFT
pushbutton switch (J).
5*
At left side discharger (G), check
that vehicle voltage (24 ± 6 VDC)
is present at barrels 3, 4, 6 and is
not present at barrels 1 , 2, 5.
6.
Press and hold FIRE SMOKE RIGHT
pushbutton switch (K).
7.
At left side discharger (G), check
that vehicle voltage (24 ± 6 VDC)
is present at barrels 1, 2, 5 and is
not present at barrels 3, 4, 6.
Go on to Sheet 3
TA248806
22-31