TM-5-5420-203-14
BRIDGE, ARMORED VEHICLE LAUNCHED, SCISSORING TYPE CLASS 60 & CLASS 70 ALUMINUM, 60 FOOT SPAN; FOR M48A5 AND M60 LAUNCHER
TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE
JUNE 1991
TM-5-5420-203-14 - Page 72 of 298
TM 5-5420-203-14
c. Assembly of the Bridge Separated into Eight Sections - CONT
(14) Installation of Far-Shore Center Section Transverse Braces.
NOTE
The pintles of the transverse braces are threaded. The brace maybe installed on either side
of the clip angles.
(a) Position first transverse brace (1) so holes aline with clip angles on center sections (2)
and (3).
(b) Insert four bolts (4) through clip angles and thread into transverse brace (l). Tighten four
bolts (4).
(c) Position second transverse brace (5) so holes aline with clip angles on center sections (2)
and (3).
(d) Insert four bolts (6) through clip angles and thread into transverse brace (5). Tighten four
bolts (6).
2-22
Back to Top
