TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 490 of 750

TM 5-5420-228-24

HYDRAULIC FLUID FILTER ASSEMBLY REPAIR (Sheet 1 of 8)

PROCEDURE INDEX

PROCEDURE

PAGE

Disassembly

3-211

Cleaning and Inspection

3-215

Assembly

3-215

TOOLS:

18 in. pipe wrench

Hammer

9/64 in. socket head screw key (allen wrench)

1/4 in. socket head

SC

re

W

key (allen wrench)

Flat-tip screwdriver

1/2 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

Slip joint pliers

15/16 in. open end wrench

SUPPLIES:

Cotter pin

Gasket

Preformed packings (3 required)

Rags (Item 12, Appendix D)

Dry cleaning solvent (Item 15, Appendix D)

Ring, wiper

Drive screws (4 required)

Lockwashers (8 required)

PERSONNEL: T

WO

PRELIMINARY PROCEDURE:

Remove filter assembly (page 3-208)

DISASSEMBLY:

1.

Using 1/4 inch screw key, remove plug (A)

from cover (B).

2.

Using socket, remove four screws (C) and

lockwashers (D).

3.

Manually remove cover (B) and attached

parts as an assembly from housing (E).

Go on to Sheet 2

TA251606

3-211