TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 483 of 750

TM 5-5420-228-24

HEU CONTROL VALVE HOSE CLAMPS REPLACEMENT (Sheet 1 of 2)

PROCEDURE INDEX

P

r

o

c

e

d

u

r

e

s

P

a

g

e

Removal

3-204.82

Installation

3-204.83

TOOLS:

1/2-inch drive ratchet

9/16-in. socket with 1/2-inch drive

3/8-in. socket head key

REMOVAL:

1.

Use socket to remove eight screws (A) and washers (B) from hose clamp (C). Remove hose clamp (C).

2.

Displace hydraulic hoses and remove split bushings (D) from hydraulic hoses and clamp (C).

3.

Use 3/8 inch socket head screw key to remove six stacking nuts (E) from hose clamps (F) and (C).

4.

Remove hose clamps (F) and (C).

5.

Displace hoses and remove split bushings (D) from hydraulic hoses and clamp (C).

6.

Using 3/8 inch socket head screw key, remove eight stacking nuts (E) from clamp (F). Remove clamp (F).

Go on to Sheet 2

3-204.82

Change 3

D

D

C

A

F

F

E

C

C

B

F