TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 486 of 750

TM 5-5420-228-24

SERVICING HYDRAULIC RESERVOIR FILTER ASSEMBLY (Sheet 2 of 2)

CLEANING AND INSPECTION:

1.

2.

3.

Cleaning agent specified is flammable. Use only in well ventilated areas. Keep away

from flames, sparks, or heat. Do not smoke while using. Prevent contact with eyes,

mouth, and/or skin. Wear rubber gloves when performing cleaning procedures.

Using rags and dry cleaning solvent,

clean all parts.

Inspect filter element for damage,

cracks, or deterioration. Replace

filter element if defective

(page 3-211).

INSTALLATION:

1.

Manually install new preformed packing (A)

in filter element (B).

2.

Manuallv install new preformed packing (C) in cover

(D).

3.

Aline groove (E) of filter element (B) with

tab (F) on cover (D) and press filter element

(B) on cover (D) until tab (F) snaps in place.

Insert assembled filter element (B) and

4.

cover (D) in housing (G) and aline screw

holes.

5.

6.

7.

8.

9.

10.

Manually install four screws (H) and new

lockwashers (J).

Using socket, tighten four screws (H).

Service hydraulic reservoir (LO 5-5420-202-12).

Bleed hydraulic system (page 3-72).

Check for hydraulic leaks and correct as necessary.

Service hydraulic reservoir (LO 5-5420-202-12).

End of Task

TA251602

3-207