TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 485 of 750

TM 5-5420-228-24

SERVICING HYDRAULIC RESERVOIR FILTER ASSEMBLY (Sheet 1 of 2)

TOOLS: Flat-tip screwdriver (small)

1/2 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

SUPPLIES:

Reformed packings

Container (approx. 2 gal.)

Lockwashers (4 required)

Rags (Item 12, Appendix D)

Dry cleaning solvent (Item 15, Appendix D)

Gloves (Item 27, Appendix D)

REFERENCE:

LO 5-5420-202-12

PRELIMINARY PROCEDURE:

Relieve hydraulic pressure (page 3-71)

REMOVAL:

NOTE

. A built in shut off will block the flow of fluid

from reservoir when filter element is removed.

. Use container to catch hydraulic fluid trapped in

line.

1.

Using socket, remove four screws (A) and

lockwashers (B).

2.

Pull cover (C) and attached filter element

(D) from housing (E).

3.

Pull filter element (D) loose from cover (C).

4.

Using screwdriver,

remove and throw

away two preformed packings (F and G).

Go on to Sheet 2

3-206