TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 515 of 750

TM 5-5420-228-24

HEU OR EARLY MODEL OVERHEAD CYLINDER REPAIR (Sheet 5 of 6)

10.

Install new wiper ring (M) on piston rod (B).

11.

Install retaining plate (N) on piston rod (B) and aline holes with bushing (L).

12.

Using cross-tip screwdriver, install four new screws (P).

13.

Remove tape from threads of piston rod (B).

14.

Using second technician, manually start rod end (Q) on piston rod (B).

15.

Have one technician use cylinder rod wrench on flats of piston rod (B), and second technician insert pin (R) through

rod end eye (S).

16.

Using pin (R) as a lever, install rod end (Q).

17.

Remove pin (R).

Go on to Sheet 6

3-230.6

Change 3