TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 555 of 750

TM 5-5420-228-24

HEU AND EARLY MODEL EJECTION CYLINDERS REPAIR (Sheet 4 of 4)

5.

Install new wiper ring (A) in bushing (B).

6.

Screw bushing (B) into retainer (C).

7.

Use spanner wrench in unthreaded holes (D) to tighten

bushing (B) to retaining plate (C).

8.

Install new wiper ring (E) (Early Model) or scraper (E)

(HEU Model) in bushing (B).

9.

Install retaining plate (F) on piston rod (G).

10.

Use screwdriver to install four screws (H).

11.

Remove tape from threads of piston rod (G).

12.

Install ejection cylinder(s) (pages 3-245 and/or 3-249)

(Early Model) or (page 3-250.3) (HEU Model).

End of Task

3-250.8

Change 3